Mpls software vendor...from India - Aricent

MPLS software ... company from India

mpls signalling

..... from Aricent India.

Futursoft is a ... mpls software vendor from India.

Mpls signalling software overview

Mpls vendor company Extensions to RSVP for LSP Tunnels (8/29) MPLS Vendor Support of Differentiated Services (6/27) LSP Modification Using CR-LDP (9/01) Definitions of Managed Objects for LDP (8/29) MPLS Label Switch Router Management Information Base
2. Advance the Proposed Standards developed by the MPLS WG to Draft Standard. This includes the LDP, CR-LDP, and RSVP-TE signaling specifications as well as the mpls encapsulations.

3. Specify appropriate extensions to LDP and RSVP for authentication of LSP originators.

4. Complete work on the MPLS-TE MIB.

5. Specify improved fault tolerance mechanisms for LDP mpls

6. Specify MPLS-specific recovery mechanisms to allow one label-switched path to be used as backup for a set of other label-switched paths, including cases which permit local repair. What constitutes the necessary set of MPLS-specific recovery mechanism should be ascertained through cooperation with the CCAMP and TE working groups.

7. Document additional MPLS encapsulations to allow the operation of label-switched paths over additional lower-layer technologies, such as time-division (e.g. SONET ADMs), wavelength (optical lambdas) and spatial switching (e.g. incoming fiber to outgoing fiber).

8. mpls Complete work in progress for specifying the framework for IP multicast over label switched paths.

9.MPLS software vendor company from India

Leaders in Convergent Networks - Aricent

Vous êtes ici > Products > Protocol Stacks > By Technology Domains >MPLS

Aricent MPLS

Aricent MPLS Overview :

Aricent MPLS (Multi Protocol Label Switching) software is an efficient and portable implementation of the label switching capability mechanism as required by industry standards. It supports RSVP extensions for traffic engineering (RSVP-TE), Label Distribution Protocol (LDP) with Constraint-based Routed Label Switched Paths (CR-LSP), MPLS Forwarding Module and Diff-Serv aware signaling.
MPLS
Figure 1. Aricent MPLS Architecture

Aricent MPLS Features:

Configurable as LER or LSR.

Traffic Engineering (TE) tunnels using RSVP-TE.

Basic and extended Label Distribution Protocol (LDP) mechanisms.

Diff-Serv aware E-LSP and L-LSP signaling.

Constraint-based routed LSP (CR-LSP).

RSVP-TE and CR-LSP tunnel modifications.

Multiple FEC classifications based on:

IP Address Prefix.

Host Address.

Downstream On Demand Independent and Ordered control label distribution modes.

Conservative Label Retention mode.

Loop detection using path vectors and hop counts (CR-LDP).

Stacked LSPs.

Provides Loop detection using RRO (RSVP-TE).

RSVP-TE Hello message extensions for rapid detection of node failures.

LSP Preemption (Setup and Holding).

Resource Class Affinity Attribute handling.

Ethernet and ATM interface.

Pre-integrated with Aricent IP, Aricent RIP Aricent TCP, Aricent OSPF, Aricent QoS and Aricent SNMP.

Dynamic trace level configuration.

Completely configurable through SNMP and CLI.

Conforms to Future Software Architecture for Portability Release (FSAP2), thus ensuring highly portable code, which uses flexible buffer and timer management libraries.

Aricent MPLS Benefits
Aricent MPLS reduces the time to market for OEMs and VARs who wish to incorporate the MPLS functionality into their switching/routing devices.

-->